Parker Push-Lok hose can handle up to 250psi and works on most oil, water and fuel applications. Synthetic rubber tube is covered with one layer of textile braid combined with another rubber cover. Temp range -40 to 212*f. Fits our popular "Push-lite" fittings too. (Priced per foot) 

These Aluminum Female AN thread Bungs are used in many applications such as Dry Sump oiling systems, Valve cover breathers and custom fuel cells. Weld-on design.

True Billet Flex Plates from Meziere are one-piece for maximum stength and durability. Zinc plated. Flex plates come set-up for internal balance (except GM3800), please contact us for external balance. SFI 29.1

This flame retardant slit loom is manufactured to meet the stringent requirements of the marine and emergency vehicle industries. The high rise ridge of this loom offers greater flexibility without twisting, tangling or slit separation. It meets UL 94-V2 rating for flame retardancy, with a temperature range of -40° F to 275° F. Sold per foot.

Our Aluminum loom clamp kits have a removable neoprene cushion, which helps cut vibration while protecting the loom or cables. Sold in packs listed below. Typical applications include holding fuel and hydraulic hoses, wire harnesses and cables. The mounting hole is 17/64" for 1/4" screw or bolts.

These L.E.D. Indicator lamps work great for race car Switch Control Panels. Available in Red, Amber, Green or Blue. Also available with wire leads or terminals.

If you need a Silicone hose longer than 3 inches we now carry 3 foot sticks of our 3 Ply Silicone Hose. We can cut any length up to 3' for custom applications. Hose is priced per foot.

Use these "T" Bulkhead fittings to join multiple hoses through firewalls or frame rails.

Just like the very popular WP346, This pump is great for your race car or custom belt routing set-up.

O-ring Seal Port Adapters for remote mount water pumps on Chevy engines. Sold in pairs

Our 304 Stainless Steel 90* Mandrel Bent elbows are great for custom Exhaust systems or cold Air piping. Leg lengths are twice the diameter. (ex: 3" diameter elbow has 6" leg on each end) 

Great alternative to the light weight Aluminum Adapters when added strength and durability is needed. Available in many sizes.

Bulkhead "T" on run allows optional mounting locations for your custom plumbing job.

These handy composite devices make installing AN sockets over the cut end of stainless braided hose a breeze. 900510 contains -4, -6, -8 / 900511 contains -10, -12, -16

Use our Aluminum 90* Mandrel Bends to build your custom Cold Air kit, Intercooler kit or race car exhaust system. 16 gauge unless otherwise noted. Leg lengths are twice the diameter. (ex. 2" elbow has 4" legs on each end)

These 2 1/2" Cap and Bung assemblies are sold with an Aluminum cap and your choice of Steel or Aluminum Bung. Great for valve covers, oil pans, differentials and fuel tanks. 2.50"-20 thread

Steel Bulkhead fittings

Bulkhead fittings for running hose through firewalls or frame rails.

45* steel bulkhead fitting